X-Graph Smart Enclosure Our most popular enclosure fits all X-Graph modules and all LCD's except the 10.4". This attractive enclosure can be wall-mounted or used on a table top. The large operating area is used to install the LCD, touchscreen and keypad. This is a four-part case. The bottom part can be fixed directly to the wall via 2 elongated holes or 4 holes in the corners of the case. It can also be installed on a table with 4 adhesive feet. The top part is assembled by means of easily accessible screws. Two side parts are easily locked to cover the screws. If required, the side panels can be locked to prevent unauthorized access (screwdriver needed to unlock). The X-Graph module can be installed in the bottom part with the I/O connectors reachable in any of the 4 directions. For samples the X-Graph module is installed on the LCD and the connectors are reachable inside the enclosure. There is a lot of space for expansion cards and connectors. The battery compartment can be used to power the X-Graph module (limited power available).   Versions / Options Standard kit: bottom and top part, two side panels, two side panel locking parts, 4 screws to attach top to bottom part. Colors: off-white (RAL9002) or black (NCS S 7502-B) Hinged Lid: off-white, black, translucent or transparent 4pcs of rubber feet for table top install Battery clips for 2x AA battery   Technical Data Dimensions (WxLxH): 270x200x48 mm Width of keypad area: 180x128 mm Protection class: IP40 Material: ABS (UL 94 HB) Mechanical drawing Delivery time: 4 weeks X-Graph Stock item: Smart Off-White